This diesel kit adds Bluetooth control. Use the SmarTemp app on your phone to control the heater, change its settings, and view diagnostic information. It suits builds where you want to adjust the heat without getting up.
The Air Top Pro 25 is Webasto's new air heater for trucks, vans, RVs, buses, and work vehicles. It replaces the Air Top 2000 STC. It gives you more heat and more control in a body that is about the same size.
This is the diesel sleeper kit with the Webasto SmarTemp 3.0 digital controller. Connect it to your phone by Bluetooth and run the heater from the SmarTemp app. It is a good fit for vans, RVs, and trucks where you want control from your phone.
It has the widest heat range in its class. In normal use it runs from 2,400 BTU/h (0.7 kW) up to 7,000 BTU/h (2.0 kW). Boost mode gives you 8,500 BTU/h (2.5 kW) and holds it for up to 6 hours. The heater changes its power in small steps to hold the temperature you set. A low minimum output means fewer restarts. That is easier on your battery and quieter at night.
How it compares to the Air Top 2000 STC
| Feature | Air Top Pro 25 | Air Top 2000 STC |
|---|---|---|
| Heat range (diesel) | 2,400 to 7,000 BTU/h (0.7 to 2.0 kW) | 3,100 to 7,000 BTU/h (0.9 to 2.0 kW) |
| Boost mode | 8,500 BTU/h (2.5 kW) for up to 6 hours | Not available |
| Altitude adjustment | Automatic | Manual |
| Fan drive | Brushless EC motor | DC motor |
| Size (L x W x H) | 12.6 x 5 x 4.9 in (321 x 127 x 124 mm) | 12.25 x 4.78 x 4.85 in (311 x 120 x 121 mm) |
| Footplate and air inlet/outlet | Same as the 2000 STC | Standard |
The controller: Webasto SmarTemp 3.0 Bluetooth
This kit comes with the SmarTemp 3.0 digital controller. It connects to the SmarTemp app on your phone by Bluetooth.
- Control the heater and change its settings from the app
- View diagnostic information for the heater
- Program heater settings
- Manage settings for more than one heater in the same app
- Link to TechWebasto.com for support information
Technical specifications
| Specification | Value |
|---|---|
| Fuel | Diesel. Also runs on paraffinic fuel (HVO/GTL). |
| Voltage | 12 V |
| Heat output, control range | 2,400 to 7,000 BTU/h (0.7 to 2.0 kW) |
| Heat output, boost | 8,500 BTU/h (2.5 kW), up to 6 hours |
| Fuel consumption | 2.9 to 10.3 fl oz/h (85 to 305 ml/h). About 12 to 44 hours per gallon. |
| Electrical power consumption | 21 W max |
| Operating temperature | -40 to 104 F (-40 to 40 C) |
| Altitude | Operates up to about 18,000 ft (5,500 m). Full heat output up to about 9,800 ft (3,000 m). |
| Size (L x W x H) | 12.6 x 5 x 4.9 in (321 x 127 x 124 mm) |
| Weight | 6.5 lb (2.95 kg) |
| Fan | Brushless EC motor |
| Mechanical interface | Same footplate and air inlet/outlet as the Air Top 2000 STC |
| Electrical interface | 19.7 in (500 mm) wiring harness with 8-pin connector, plus 39.4 in (1,000 mm) dosing pump cable |
| Communication | W-Bus, LIN, CI-Bus. Webasto lists CAN J1939 as "available soon." |
| Approvals and standards | ECE R10, ECE R122, CE. Cyber security to ISO/SAE 21434. Functional safety to ISO 26262. |
Fuel hours per gallon are calculated from Webasto's fuel consumption figures.
What is in the kit
- Air Top Pro 25 diesel heater, 12V
- Webasto SmarTemp 3.0 digital controller (Bluetooth)
- Fuel pump
- Base seal
- Heater wire harness
- Fuel pump wire harness
- Fuel line
- Heavy-duty fuel tank standpipe
- Flexible stainless steel exhaust tubing
- Combustion air tubing
- Flexible cabin air ducting
- Air louvers
Installation notes
- The heater mounts inside the vehicle or outside on the chassis.
- It uses the same mounting footplate and air inlet and outlet sizes as the Air Top 2000 STC. The wiring and controller are new, so use the harness and controller in this kit.
- The wiring is plug and play, with a 19.7 in (500 mm) heater harness and a separate 39.4 in (1,000 mm) dosing pump cable.
- Installation needs a hole for the exhaust, a hole for the combustion air, a tap into your fuel tank, and a place in the vehicle for the controller.
- The heater draws fuel from your vehicle's tank. You do not carry separate fuel.
- Professional installation is available at any Momentum Upfitters location. Submit an installation inquiry. See the pricing below.
Professional installation
Professional installation is available at any Momentum Upfitters location. We have shops in Salt Lake City, Utah and Fort Collins, Colorado. Installation generally costs:
| Vehicle | Installation price |
|---|---|
| Vans with an aux fuel port | $999 |
| Most other vehicles | $1,299 |
To have this heater installed, submit an inquiry on our heater installation page. We will confirm pricing for your vehicle.
Important information
- Match the heater to your fuel. This kit is for diesel vehicles. If your vehicle runs on gasoline, choose a gasoline kit.
- Boost mode gives 8,500 BTU/h (2.5 kW) for up to 6 hours at a time.
- Altitude. Full heat output is available up to about 9,800 ft (3,000 m). Above that, the heater adjusts automatically and keeps running up to about 18,000 ft (5,500 m).
- Diagnostics. Webasto's new heaters work with the Webasto System Diagnostics tool. Contact us if your heater needs service.
- Use. These kits are sold for land vehicles. If you have a marine use, contact us first.
Which kit is right for you?
| Part number | Fuel | Control | Ducting in kit | Heat range |
|---|---|---|---|---|
| 5014433A | Diesel | Rheostat dial | Yes | 2,400 to 7,000 BTU/h (0.7 to 2.0 kW), boost 8,500 BTU/h (2.5 kW) |
| 5014494A (this kit) | Diesel | SmarTemp 3.0 Bluetooth | Yes | 2,400 to 7,000 BTU/h (0.7 to 2.0 kW), boost 8,500 BTU/h (2.5 kW) |
| 5014436A | Gasoline | Rheostat dial | No | 2,730 to 7,000 BTU/h (0.8 to 2.0 kW), boost 8,500 BTU/h (2.5 kW) |
| 5014495A | Gasoline | SmarTemp 3.0 Bluetooth | Yes | 2,730 to 7,000 BTU/h (0.8 to 2.0 kW), boost 8,500 BTU/h (2.5 kW) |
Shipping
Pre-orders are expected to ship between November 20th and December 1st.
Alternative Products
These other products might interest you