At a glance
Highlights
- Bluetooth setup and monitoring in the VictronConnect app
- IP43 rated housing
- 30 and 50 A models
- Three outputs, or one main plus one starter output
Key specs
- AC input voltage range: 85 to 250 VAC
- Charge Current Low Mode: 15 A / 25 A
- Maximum efficiency: 95 % / 94 %
- Bluetooth: Yes, -4dBm, 2402 - 2480 MHz
- Protection category: IP43
| Specification | 30 A, 3 Outputs | 50 A, 1+1 Outputs | 50 A, 3 Outputs |
|---|---|---|---|
| AC input frequency range | 45 to 65 Hz | 45 to 65 Hz | 45 to 65 Hz |
| AC input voltage Bucket | 120 V - 240 V | 120 V - 240 V | 120 V - 240 V |
| AC input voltage range | 85 to 250 VAC | 85 to 250 VAC | 85 to 250 VAC |
| Back current drain | 1 mA | 1 mA | 1 mA |
| Charge voltage float | Normal: 13.8V High: 13.8V Li-ion: 13.5V | Normal: 13.8V High: 13.8V Li-ion: 13.5V | Normal: 13.8V High: 13.8V Li-ion: 13.5V |
| Charge voltage storage | Normal: 13.2V High: 13.2V Li-ion: 13.5V | Normal: 13.2V High: 13.2V Li-ion: 13.5V | Normal: 13.2V High: 13.2V Li-ion: 13.5V |
| Data Communication | Bluetooth,VE.Direct | VE.Direct,Bluetooth | Bluetooth,VE.Direct |
| DC input voltage range | 90 to 375 VDC | 90 to 375 VDC | 90 to 375 VDC |
| Bluetooth | Yes, -4dBm, 2402 - 2480 MHz | Yes, -4dBm, 2402 - 2480 MHz | Yes, -4dBm, 2402 - 2480 MHz |
| Nominal battery voltage | 12 V | 12 V | 12 V |
| Charge algorithm | Adaptive, 6-stage | Adaptive, 6-stage | Adaptive, 6-stage |
| Charge Current Low Mode | 15 A | 25 A | 25 A |
| Charge Current Normal Mode (Nominal value) | 30 A | 50 A | 50 A |
| Charge voltage Absorption | Normal: 14.4V High: 14.7V Lithium: 14.2V | Normal: 14.4V High: 14.7V Lithium: 14.2V | Normal: 14.4V High: 14.7V Lithium: 14.2V |
| Number of fully rated charge outputs | 3 | 1 | 3 |
| Operating temperature range | -20 to 60 C | -20 to 60 C | -20 to 60 C |
| Ouput fully rated up to | 40 C | 40 C | 40 C |
| Powe rfactor | 1 | 1 | 1 |
| Power supply mode | Yes | Yes | Yes |
| Fully programable | Yes | Yes | Yes |
| Linearly Derating between 40 and 60 C | 20 % | 20 % | 20 % |
| Lithium compatible | Yes | Yes | Yes |
| Maximum humidity (non-condensing) | 95 % | 95 % | 95 % |
| No load power consumption | 1 W | 1 W | 1 W |
| Temperature compensation (adjustable) | -16 mV/ C | -16 mV/ C | -16 mV/ C |
| Programable relay | SPDT - 5 A up to 250 VAC / 5 A up to 28 VDC | SPDT - 5 A up to 250 VAC / 5 A up to 28 VDC | SPDT - 5 A up to 250 VAC / 5 A up to 28 VDC |
| Protections | Battery reverse polarity (fuse not user accessible),Output short-circuit,Over temperature | Battery reverse polarity (fuse not user accessible),Output short-circuit,Over temperature | Battery reverse polarity (fuse not user accessible),Output short-circuit,Over temperature |
| Remote on/off terminal | Yes | Yes | Yes |
| Maximum efficiency | 95 % | 94 % | 94 % |
| Temperature Sensor | Optional (Smart Battery Sense) | Optional (Smart Battery Sense) | Optional (Smart Battery Sense) |
| Low current starter battery output (4A) | - | Yes | - |
| AC connection terminal type | Inlet IEC 320 C14 with retainer clip (AC cord ordered separately) | Inlet IEC 320 C14 with retainer clip (AC cord ordered separately) | Inlet IEC 320 C14 with retainer clip (AC cord ordered separately) |
| Battery connection terminal type | Screw terminals 16 mm2 (6 AWG) | Screw terminals 16 mm2 (6 AWG) | Screw terminals 16 mm2 (6 AWG) |
| Remote On Off Terminal Connection | Screw terminal two pole | Screw terminal two pole | Screw terminal two pole |
| Relay Terminal Connection | Screw terminal 3-pole | Screw terminal 3-pole | Screw terminal 3-pole |
| Starter battery terminal type | - | Screw terminal two pole | - |
| Protection category | IP43 | IP43 | IP43 |
| Weight | 2.7 kg | 2.7 kg | 2.7 kg |
| Width | 249 mm | 249 mm | 249 mm |
| Material | Aluminium | Aluminium | Aluminium |
| Height | 180 mm | 180 mm | 180 mm |
| Depth | 116 mm | 116 mm | 116 mm |
| Colour | Blue (RAL 5012) | Blue (RAL 5012) | Blue (RAL 5012) |
| Vibration | IEC68-2-6:10-150Hz/1.0G | IEC68-2-6:10-150Hz/1.0G | IEC68-2-6:10-150Hz/1.0G |
| Emission | EN 55014-1,EN-IEC 61000-3-2,EN-IEC 61000-6-3 | EN 55014-1,EN-IEC 61000-3-2,EN-IEC 61000-6-3 | EN 55014-1,EN-IEC 61000-3-2,EN-IEC 61000-6-3 |
- Phoenix Smart IP43 charger
Check the Victron manual for the full contents.
Connect the charger to the battery and plug it in. Choose the right battery type in the VictronConnect app.
We install Victron systems at our shops in Salt Lake City, Utah and Fort Collins, Colorado. See our installation page or send us an inquiry.
5 year warranty. Read Victron's warranty terms.
Ships in 1 to 5 business days.
Alternative Products
These other products might interest you