At a glance
Highlights
- Bluetooth setup and monitoring in the VictronConnect app
- IP43 rated housing
- 25 A charge current
- Three outputs, or one main plus one starter output
Key specs
- DC input voltage range: 90 to 375 VDC
- Charge Current Normal Mode (Nominal value): 25 A
- Maximum efficiency: 96 %
- Bluetooth: Yes, -4dBm, 2402 - 2480 MHz
- Protection category: IP43 / IP43 (electronic components)
| Specification | 25 A, 1+1 Outputs | 25 A, 3 Outputs |
|---|---|---|
| Temperature compensation (adjustable) | -32 mV/ C | -32 mV/ C |
| DC input voltage range | 90 to 375 VDC | 90 to 375 VDC |
| Lithium compatible | Yes | Yes |
| Linearly Derating between 40 and 60 C | 20 % | 20 % |
| Fully programable | Yes | Yes |
| Maximum efficiency | 96 % | 96 % |
| Low current starter battery output (4A) | Yes | - |
| Data Communication | Bluetooth,VE.Direct | VE.Direct,Bluetooth |
| Charge voltage storage | Normal: 26.4V High: 26.4V Li-ion: 27.0V | Normal: 26.4V High: 26.4V Li-ion: 27.0V |
| Charge voltage float | Normal: 27.6V High: 27.6V Li-ion: 27.0V | Normal: 27.6V High: 27.6V Li-ion: 27.0V |
| Charge voltage Absorption | Normal: 28.8V High: 29.4V Lithium: 28.4V | Normal: 28.8V High: 29.4V Lithium: 28.4V |
| Charge Current Normal Mode (Nominal value) | 25 A | 25 A |
| Charge Current Low Mode | 12.5 A | 12.5 A |
| Charge algorithm | Adaptive, 6-stage | Adaptive, 6-stage |
| Power supply mode | Yes | Yes |
| Temperature Sensor | Optional (Smart Battery Sense) | Optional (Smart Battery Sense) |
| Remote on/off terminal | Yes | Yes |
| Protections | Battery reverse polarity (fuse not user accessible),Output short-circuit,Over temperature | Battery reverse polarity (fuse not user accessible),Output short-circuit,Over temperature |
| Programable relay | SPDT - 5 A up to 250 VAC / 5 A up to 28 VDC | SPDT - 5 A up to 250 VAC / 5 A up to 28 VDC |
| Bluetooth | Yes, -4dBm, 2402 - 2480 MHz | Yes, -4dBm, 2402 - 2480 MHz |
| Powe rfactor | 1 | 1 |
| Ouput fully rated up to | 40 C | 40 C |
| Operating temperature range | -20 to 60 C | -20 to 60 C |
| Number of fully rated charge outputs | 1 | 3 |
| No load power consumption | 1 W | 1 W |
| Maximum humidity (non-condensing) | 95 % | 95 % |
| Nominal battery voltage | 24 V | 24 V |
| Back current drain | 1 mA | 1 mA |
| AC input voltage range | 58 to 250 VAC | 85 to 250 VAC |
| AC input voltage Bucket | 120 V - 240 V | 120 V - 240 V |
| AC input frequency range | 45 to 65 Hz | 45 to 65 Hz |
| AC connection terminal type | Inlet IEC 320 C14 with retainer clip (AC cord ordered separately) | Inlet IEC 320 C14 with retainer clip (AC cord ordered separately) |
| Battery connection terminal type | Screw terminals 16 mm2 (6 AWG) | Screw terminals 16 mm2 (6 AWG) |
| Starter battery terminal type | Screw terminal two pole | - |
| Remote On Off Terminal Connection | Screw terminal two pole | Screw terminal two pole |
| Relay Terminal Connection | Screw terminal 3-pole | Screw terminal 3-pole |
| Material | Aluminium | Aluminium |
| Height | 180 mm | 180 mm |
| Depth | 116 mm | 116 mm |
| Colour | Blue (RAL 5012) | Blue (RAL 5012) |
| Protection category | IP43 | IP43 (electronic components) |
| Weight | 2.7 kg | 2.7 kg |
| Width | 249 mm | 249 mm |
| Immunity | EN 55014-2,EN-IEC 61000-3-3,EN-IEC 61000-6-1, EN-IEC 61000-6-2 | EN 55014-2,EN-IEC 61000-3-3,EN-IEC 61000-6-1, EN-IEC 61000-6-2 |
| Emission | EN 55014-1,EN-IEC 61000-3-2,EN-IEC 61000-6-3 | EN 55014-1,EN-IEC 61000-3-2,EN-IEC 61000-6-3 |
- Phoenix Smart IP43 charger
Check the Victron manual for the full contents.
Connect the charger to the battery and plug it in. Choose the right battery type in the VictronConnect app.
We install Victron systems at our shops in Salt Lake City, Utah and Fort Collins, Colorado. See our installation page or send us an inquiry.
5 year warranty. Read Victron's warranty terms.
Ships in 1 to 5 business days.
Alternative Products
These other products might interest you