At a glance
Highlights
- True sine wave inverter, battery charger and AC transfer switch in one unit
- PowerAssist adds battery power when AC power is limited
- Connects to a Cerbo GX for monitoring and control over VE.Bus
- Can run in parallel or three-phase systems
Key specs
- Nominal battery voltage: 12 V
- Continuous inverter AC output power at 25 C: 1,600 W
- Peak power rating: 3,500 W
- Maximum efficiency: 93 %
- Protection category: IP22
| Specification | Value |
|---|---|
| Zero load power in search mode | 3 W |
| Continuous inverter AC output power at 25 C | 1,600 W |
| Continuous power at 25 C (Nonlinear load, crest factor 3:1) | 2,000 VA |
| Programming via computer or app | Yes |
| Communication Port | VE.Bus |
| Charge voltage storage (adjustable) | 13.2 VDC |
| Charge voltage float (adjustable) | 13.8 VDC |
| Charge voltage absorption (adjustable) | 14.4 VDC |
| Charge algorithm | Adaptive, 4-stage |
| Nominal battery voltage | 12 V |
| AC output voltage +/-2% (adjustable) | 120 VAC |
| AC output frequency +/-0.1% (adjustable) | 60 Hz |
| AC Input voltage range | 95 to 140 VAC |
| AC input frequency range | 45 to 65 Hz |
| Continuous inverter AC output power at 40 C | 1,400 W |
| Parallel operation | Yes |
| Zero Load Power | 10 W |
| Transfer switch AC current rating | 50 A |
| Three phase operation | Yes |
| Temperature Sensor | Included |
| Starter battery charge output | Yes |
| Starter battery charge current | 1 A |
| Remote terminal | On / Off / Charger only |
| Protections | Output short-circuit,Overload,High battery voltage,Low battery voltage,Over temperature,AC voltage on inverter output,Excessive DC ripple,Overcurrent,Automatic load disconnect |
| Programmable relay | AC rating: 230V / 4A, DC rating: 4A up to 35VDC and 1A up to 60VDC |
| PowerControl | Yes |
| PowerAssist | Yes |
| Peak power rating | 3,500 W |
| Operating temperature range (fan assisted cooling) | -40 to 65 C |
| Number of AC Outputs | 1 |
| Number of AC Inputs | 1 |
| Maximum charge current (up to 25 C ambient) | 80 A |
| Maximum humidity (non-condensing) | 95 % |
| Maximum efficiency | 93 % |
| Maximum AC input current | 50 A |
| Fan assisted cooling | Yes |
| DC Input voltage range | 9.5 to 17 VDC |
| Continuous inverter AC output power at 65 C | 1,000 W |
| Battery connection terminal type | M8 bolts |
| VE.bus communication port | Two RJ45 terminals |
| AC connection terminal type | Screw terminals 13 mm2 (6 AWG) |
| Relay terminal type | Screw terminal 3-pole |
| Remote terminal type | Screw terminal two pole |
| Protection category | IP22 |
| Depth | 147 mm |
- MultiPlus 12/2000/80-50
- Temperature sensor
Battery cables, fuses and a GX device are sold separately.
Use thick battery cables and a fuse close to the battery. Set the AC input limit and charge settings with VictronConnect or VEConfigure.
We install Victron systems at our shops in Salt Lake City, Utah and Fort Collins, Colorado. See our installation page or send us an inquiry.
5 year warranty. Read Victron's warranty terms.
Ships in 1 to 5 business days.
Alternative Products
These other products might interest you