At a glance
Highlights
- True sine wave inverter, battery charger and AC transfer switch in one unit
- PowerAssist adds battery power when AC power is limited
- Connects to a Cerbo GX for monitoring and control over VE.Bus
- Single unit only
Key specs
- DC Input voltage range: 9.5 to 17 VDC
- Maximum charge current (up to 25 C ambient): 160 A
- Peak power rating: 6,000 W
- Maximum efficiency: 93 %
- Operating temperature range (fan assisted cooling): -40 to 65 C
| Specification | Value |
|---|---|
| Fan assisted cooling | Yes |
| Remote terminal | On / Off |
| DC Input voltage range | 9.5 to 17 VDC |
| Transfer switch AC current rating | 50 A |
| Zero load power in search mode | 4 W |
| PowerControl | Yes |
| Programmable relay | AC rating: 120V / 4A, DC rating: 4A up to 35VDC and 1A up to 60VDC |
| PowerAssist | Yes |
| Three phase operation | No |
| Peak power rating | 6,000 W |
| Zero Load Power | 18 W |
| Parallel operation | No |
| Operating temperature range (fan assisted cooling) | -40 to 65 C |
| Temperature Sensor | Included |
| Zero load power in AES mode | 11 W |
| Protections | Output short-circuit,Overload,High battery voltage,Low battery voltage,Over temperature,AC voltage on inverter output,Excessive DC ripple |
| Number of AC Inputs | 1 |
| Maximum charge current (up to 25 C ambient) | 160 A |
| Maximum humidity (non-condensing) | 95 % |
| Maximum efficiency | 93 % |
| Maximum AC input current on each leg | 50 A |
| AC input frequency range | 45 to 65 Hz |
| AC Input voltage range single phase | 90 to 140 VAC |
| AC Input voltage range split phase | 180 to 280 VAC |
| AC output frequency +/-0.1% (adjustable) | 60 Hz |
| AC output voltage +/-2% (adjustable) | 120 VAC |
| Auxiliary AC output each leg | Yes |
| Nominal battery voltage | 12 V |
| Charge algorithm | Adaptive, 4-stage |
| Charge voltage absorption (adjustable) | 14.4 VDC |
| Charge voltage float (adjustable) | 13.8 VDC |
| Charge voltage storage (adjustable) | 13.2 VDC |
| Communication Port | VE.Bus |
| General purpose communication port | Yes |
| Programming via computer or app | Yes |
| Continuous inverter AC output power at 25 C | 3,400 W |
| Continuous inverter AC output power at 40 C | 3,100 W |
| Continuous inverter AC output power at 65 C | 2,400 W |
| Battery connection terminal type | M8 bolts (two for positive and two for negative connection) |
| VE.bus communication port | Two RJ45 terminals |
| AC connection terminal type | Screw terminals 21 mm2 (4 AWG) |
| Remote terminal type | Screw terminal two pole |
| Relay terminal type | Screw terminal 3-pole |
| Weight | 25 kg |
| Width | 275 mm |
- MultiPlus-II 12/4000/160-50
- Temperature sensor
Battery cables, fuses and a GX device are sold separately.
Use thick battery cables and a fuse close to the battery. Set the AC input limit and charge settings with VictronConnect or VEConfigure.
We install Victron systems at our shops in Salt Lake City, Utah and Fort Collins, Colorado. See our installation page or send us an inquiry.
5 year warranty. Read Victron's warranty terms.
Ships in 1 to 5 business days.
Alternative Products
These other products might interest you