At a glance
Highlights
- True sine wave inverter, battery charger and AC transfer switch in one unit
- PowerAssist adds battery power when AC power is limited
- Connects to a Cerbo GX for monitoring and control over VE.Bus
Key specs
- Nominal battery voltage: 24 V
- Continuous inverter AC output power at 25 C: 2,400 W
- Peak power rating: 5,500 W
- Maximum efficiency: 94 %
- Protection category: IP22
| Specification | Value |
|---|---|
| Maximum apparent feed-in power | 2,500 VA |
| Nominal battery voltage | 24 V |
| Charge algorithm | Adaptive, 4-stage |
| Charge voltage absorption (adjustable) | 28.8 VDC |
| Charge voltage float (adjustable) | 27.6 VDC |
| Charge voltage storage (adjustable) | 26.4 VDC |
| Communication Port | VE.Bus |
| General purpose communication port | Yes |
| Programming via computer or app | Yes |
| Continuous power at 25 C (Nonlinear load, crest factor 3:1) | 3,000 VA |
| Continuous inverter AC output power at 25 C | 2,400 W |
| Continuous inverter AC output power at 40 C | 2,200 W |
| Continuous inverter AC output power at 65 C | 1,700 W |
| DC Input voltage range | 19 to 33 VDC |
| Fan assisted cooling | Yes |
| Maximum AC input current on each leg | 50 A |
| Auxiliary AC output each leg | Yes |
| Maximum efficiency | 94 % |
| Maximum humidity (non-condensing) | 95 % |
| Maximum charge current (up to 25 C ambient) | 70 A |
| Number of AC Inputs | 1 |
| Operating temperature range (fan assisted cooling) | -40 to 65 C |
| Peak power rating | 5,500 W |
| Programmable relay | AC rating: 120V / 4A, DC rating: 4A up to 35VDC and 1A up to 60VDC |
| Protections | Output short-circuit,Overload,High battery voltage,Low battery voltage,Over temperature,AC voltage on inverter output,Excessive DC ripple |
| Remote terminal | On / Off |
| Temperature Sensor | Included |
| Transfer switch AC current rating | 50 A |
| Zero Load Power | 11 W |
| Zero load power in AES mode | 8 W |
| Zero load power in search mode | 4 W |
| AC input frequency range | 45 to 65 Hz |
| AC Input voltage range single phase | 90 to 140 VAC |
| AC Input voltage range split phase | 180 to 280 VAC |
| AC output frequency +/-0.1% (adjustable) | 60 Hz |
| AC output voltage +/-2% (adjustable) | 120 VAC |
| AC connection terminal type | Screw terminals 21 mm2 (4 AWG) |
| Battery connection terminal type | M8 bolts (two for positive and two for negative connection) |
| Relay terminal type | Screw terminal 3-pole |
| VE.bus communication port | Two RJ45 terminals |
| Remote terminal type | Screw terminal two pole |
| Width | 275 mm |
| Weight | 22 kg |
| Protection category | IP22 |
| Material | Steel |
- MultiPlus-II 24/3000/70-50
- Temperature sensor
Battery cables, fuses and a GX device are sold separately.
Use thick battery cables and a fuse close to the battery. Set the AC input limit and charge settings with VictronConnect or VEConfigure.
We install Victron systems at our shops in Salt Lake City, Utah and Fort Collins, Colorado. See our installation page or send us an inquiry.
5 year warranty. Read Victron's warranty terms.
Ships in 1 to 5 business days.
Alternative Products
These other products might interest you