At a glance
Highlights
- True sine wave inverter, battery charger and AC transfer switch in one unit
- PowerAssist adds battery power when AC power is limited
- Connects to a Cerbo GX for monitoring and control over VE.Bus
- Can run in parallel or three-phase systems
Key specs
- Nominal battery voltage: 12 V
- Maximum charge current (up to 25 C ambient): 120 A
- Peak power rating: 6,000 W
- Maximum efficiency: 93 %
- Operating temperature range (fan assisted cooling): -40 to 65 C
| Specification | Value |
|---|---|
| Charge algorithm | Adaptive, 4-stage |
| Nominal battery voltage | 12 V |
| Auxiliary AC output | Yes |
| AC output voltage +/-2% (adjustable) | 120 VAC |
| AC output frequency +/-0.1% (adjustable) | 60 Hz |
| AC Input voltage range | 95 to 140 VAC |
| AC input frequency range | 45 to 65 Hz |
| Charge voltage absorption (adjustable) | 14.4 VDC |
| DIP switches for programming | Yes |
| Parallel operation | Yes |
| Operating temperature range (fan assisted cooling) | -40 to 65 C |
| Number of AC Outputs | 2 |
| Number of AC Inputs | 1 |
| Maximum charge current (up to 25 C ambient) | 120 A |
| Maximum humidity (non-condensing) | 95 % |
| Maximum efficiency | 93 % |
| Fan assisted cooling | Yes |
| Peak power rating | 6,000 W |
| DC Input voltage range | 9.5 to 17 VDC |
| Continuous inverter AC output power at 65 C | 1,700 W |
| Continuous inverter AC output power at 40 C | 2,200 W |
| Continuous inverter AC output power at 25 C | 2,400 W |
| Continuous power at 25 C (Nonlinear load, crest factor 3:1) | 3,000 VA |
| Programming via computer or app | Yes |
| General purpose communication port | Yes |
| Communication Port | VE.Bus |
| Charge voltage storage (adjustable) | 13.2 VDC |
| Charge voltage float (adjustable) | 13.8 VDC |
| Transfer switch AC current rating | 50 A |
| Zero load power in search mode | 8 W |
| Zero load power in AES mode | 15 W |
| Zero Load Power | 20 W |
| Three phase operation | Yes |
| Temperature Sensor | Included |
| Starter battery charge output | Yes |
| Starter battery charge current | 4 A |
| Remote terminal | On / Off / Charger only |
| Protections | Output short-circuit,Overload,High battery voltage,Low battery voltage,Over temperature,Excessive DC ripple,AC voltage on inverter output |
| Programmable relay | AC rating: 230V / 4A, DC rating: 4A up to 35VDC and 1A up to 60VDC |
| Power Factor | 1 |
| PowerControl | Yes |
| PowerAssist | Yes |
| VE.bus communication port | Two RJ45 terminals |
| Battery connection terminal type | M8 bolts (two for positive and two for negative connection) |
| Remote terminal type | Screw terminal two pole |
- MultiPlus 12/3000/120-50
- Temperature sensor
Battery cables, fuses and a GX device are sold separately.
Use thick battery cables and a fuse close to the battery. Set the AC input limit and charge settings with VictronConnect or VEConfigure.
We install Victron systems at our shops in Salt Lake City, Utah and Fort Collins, Colorado. See our installation page or send us an inquiry.
5 year warranty. Read Victron's warranty terms.
Ships in 1 to 5 business days.
Alternative Products
These other products might interest you