At a glance
Highlights
- Protects the battery from deep discharge by cutting off loads at a set voltage
- Detects 12 V or 24 V on its own
- Change the thresholds in the VictronConnect app over Bluetooth
- Uses very little power while it runs
Key specs
- Battery voltage nominal: 12V or 24V (automatic detection)
- Maximum continuous load current rating up to 40 C: 65 A / 100 A / 220 A
- Peak current rating (30 seconds): 250 A / 600 A
- Bluetooth: Yes
- Protection category connection area: IP00 / IP67
| Specification | 65 A | 100 A | 220 A |
|---|---|---|---|
| Default threshold disengage at 12V | 10.5 V | 10.5 V | 10.5 V |
| Default threshold disengage at 24V | 21 V | 21 V | 21 V |
| Default threshold engage at 12V | 12 V | 12 V | 12 V |
| Default threshold engage at 24V | 24 V | 24 V | 24 V |
| Load disconnect delay (immediate if triggered by the VE.Bus BMS) | 90 s | 90 s | 90 s |
| Alarm output delay | 12 s | 12 s | 12 s |
| Battery voltage nominal | 12V or 24V (automatic detection) | 12V or 24V (automatic detection) | 12V or 24V (automatic detection) |
| Bluetooth | Yes | Yes | Yes |
| Current consumption when off or in low voltage protection mode (Bluetooth on) | 0.9 mA | 0.9 mA | 0.9 mA |
| Current consumption when off or in low voltage protection mode (Bluetooth off) | 0.7 mA | 0.7 | 0.7 mA |
| Current consumption when on (Bluetooth on) | 1.4 mA | 1.4 mA | 1.4 mA |
| Current consumption when on (Bluetooth off) | 1.2 mA | 1.2 | 1.2 mA |
| Protections | Output short-circuit | Short-circuit proof | Output short-circuit |
| Remote On Off Terminal | Yes | Yes | Yes |
| Able to deal with reverse current | No | No | No |
| Load reconnect delay | 30 s | 30 s | 30 s |
| Maximum continuous load current rating up to 40 C | 65 A | 100 A | 220 A |
| Maximum continuous load current rating up to 60 C | 39 A | 60 A | 132 A |
| Maximum load on alarm output | 50 mA | 50 mA | 50 mA |
| Operating temperature range | -40 to 50 C | -40 to 50 C | -40 to 50 C |
| Operating voltage range | 6 to 35 V | 6 to 35 V | 6 to 35 V |
| Peak current rating (30 seconds) | 250 A | 600 A | 600 A |
| Alarm Terminal | Screw terminal 3-pole | Screw terminal 3-pole | Screw terminal 3-pole |
| Remote Terminal | Screw terminal two pole | Screw terminal two pole | Screw terminal two pole |
| Battery and Load Terminals | M6 bolts | M8 bolts | M8 bolts |
| Protection category connection area | IP00 | IP67 | IP00 |
| Weight | 0.2 kg | 0.5 kg | 0.8 kg |
| Width | 55 mm | 41 mm | 123 mm |
| Protection category electronic components | IP67 | IP00 | IP67 |
| Height | 48 mm | 61 mm | 60 mm |
| Depth | 106 mm | 164 mm | 121 mm |
- Smart BatteryProtect
The unit sits between the battery and the loads it protects. It can also switch on and off from a remote terminal. Wire it with a fuse sized for the rating you chose.
We install Victron systems at our shops in Salt Lake City, Utah and Fort Collins, Colorado. See our installation page or send us an inquiry.
5 year warranty. Read Victron's warranty terms.
Ships in 1 to 5 business days.
Alternative Products
These other products might interest you